Mold Remediation Technologies

Remediation Technologies

Traditional Clean Up Technology – Bleach and or Biocides

Uses

Limited area such as window frames, shower stalls, bathtub ceramic tile, grout; this would be effective against surface mold issues. Surface mold issues, not where it is growing through the wall.

Procedure

HEPA vacuum first. Wipe off with moist cloth or sponge treated with a household detergent.

Issues and Concerns

Doesn’t address cause. If applied improperly can aerosol spores. Bleach can discolor and damage surrounding areas. Not a permanent correction. No testing or certification that it was accomplished properly.

Contemporary Technology – Containment and Removal

Uses

All mold contamination issues.

Procedure

Pre Testing. Source identification and correction. Containment chambers and engineering controls (negative pressure) to avoid cross contamination. Contaminate removal. Air scrubbing to eliminate latent spores from the air. Post testing and clearance. Removal of containment.

Issues and Concerns

Issues and Concerns. Takes from 10 to 14 days. Areas need to be vacant. Contents need to be protected or removed. Costly.

Decontaminate Fogging with MDF-500 from Modec, Inc.

Uses

All mold contamination issues. Addresses unknown areas.

Procedure

Pre Testing. Source identification and correction. Limited containment and engineering controls (negative pressure only during actual contaminant removal process). Fogging Post testing and clearance. Removal of containment.

Issues and Concerns

Takes from 48 to 72 hours. Areas need to be vacant for a shorter period of time. Contents can remain in the area. Cost and time savings.

Read the Fogging FAQ. Also, contact us today to learn more.

Mold Inspection Testing,Remediation, Water Damage Repair & Structural Drying Services

Mold Inspection and Testing

Basic Sample Evaluation

Indoor environmental Air Quality Survey

Environmental Relative Moldiness Index

Allergen Screen

Forensic Investigation

Post Remediation Validation Testing

Mold Remediation & Treatment

BioCure 500

Water Damage Repair & Structural Drying

Our Customers
Rely On Us

To evaluate environmental conditions that effect their health, indoor air quality and living environment.

To apply remediation activities that will assure; no cross contamination of unaffected areas; the reduction of mold spores and mycotoxins to acceptable levels.

To structurally dry framing and finish materials for the provention of Mold growth and contamination and as a process in our Mold Remediation and Treatment activities.

Mold Remedies Indoor Environmental Professionals (IEP), Certified Applied Microbial Remediation Technicians (AMRT) and Certified Water Damage Technicians (WRT) are positioned locally to better serve and meet the critical needs of our Customers.

1(800)-460-9535

E-mail

Facebook

MOLD REMEDIES GUARANTEE

We guarantee that, based on the scope of the workspace areas treated, that these workspaces will pass Post Remediation Validation Testing (PRVT) or we shall re-clean & re-treat for FREE!

LEARN MORE…